中文
English
产品展示
PRODUCT DISPLAY
7X24 hour phone call from Monday to Saturday 9:00-18:00
13699776681
Email：dencan@nilt-ly.com
Address:C 15/f and chiao commcrt 678 nathan rd mongkokkl
-
Polycrystalline Diamond (PCD) Tool Series 1
Characteristics of Polycrystalline Diamond (PCD) Cutting Tools: The hardness of PCD can reach 8000HV, which is 8-12 times that of hard alloy_ The thermal conductivity of PCD is 700W/mK, which is 1.5 to 9 times higher than that of hard alloys, and even higher than PCBN and copper. Therefore, PCD cutting tools transfer heat quickly_ x000b_ 3. The friction coefficient of PCD is generally only 0.1-0.3 (the friction coefficient of hard alloy is 0.4-1), so PCD cutting tools can significantly reduce
-
Single Crystal Diamond (MCD) Tool Series 8
Characteristics of Single Crystal Diamond (MCD) Cutting Tools: 1. Single crystal diamond cutting tools have extremely high hardness (10000HV), resulting in good wear resistance; 2. The cutting edge of single crystal diamond cutting tools can be ground very sharply, and should not stick to the tool or produce chip lumps during cutting. It can be used for ultra-thin cutting and ultra precision machining; 3. Low friction coefficient, small deformation during processing, can reduce cutting forc
-
Single Crystal Diamond (MCD) Tool Series 7
Characteristics of Single Crystal Diamond (MCD) Cutting Tools: 1. Single crystal diamond cutting tools have extremely high hardness (10000HV), resulting in good wear resistance; 2. The cutting edge of single crystal diamond cutting tools can be ground very sharply, and should not stick to the tool or produce chip lumps during cutting. It can be used for ultra-thin cutting and ultra precision machining; 3. Low friction coefficient, small deformation during processing, can reduce cutting force;
-
Single Crystal Diamond (MCD) Tool Series 6
Characteristics of Single Crystal Diamond (MCD) Cutting Tools: 1. Single crystal diamond cutting tools have extremely high hardness (10000HV), resulting in good wear resistance; 2. The cutting edge of single crystal diamond cutting tools can be ground very sharply, and should not stick to the tool or produce chip lumps during cutting. It can be used for ultra-thin cutting and ultra precision machining; 3. Low friction coefficient, small deformation during processing, can reduce cutting force;
Phone：13699776681
Email：dencan@nilt-ly.com
Address:C 15/f and chiao commcrt 678 nathan rd mongkokkl
Copyright @ VillaGrandis All Rights Reserved ICP Registration No. 180006020-3 Site Map
